Produtos

Dust Collector

A dust collector to collect milling dust is necessary for this machine. You need to prepare a dust collector separately.

Provide a dust corrector that meets the following conditions.

  • Static pressure: 4 kPa or more
  • Air quantity: 2 m3/min or more

Use the supplied dust collection hose. You should clean the dust collector regularly.

Opening Size to Connect a Dust Collector

System Partner for Dust Collector

Compressed Air Supply Source (Compressor)

Compressed air is necessary for this machine. You need to prepare a compressor separately. You also need to prepare an air hose to connect the compressor with the regulator in addition.

Provide a compressor that meets the following conditions.

  • Control pressure: Between 0.3 and 1.0 MPa
  • Air capacity: 30 L/min or more (for one machine)
  • Oil-free type (To prevent contamination of the compressed air by foreign material.)
  • Dryer-equipped (To prevent moist air that can cause rust.)

The air hose (1) connects the compressor to the regulator.

The air hose must meet the following conditions.

  • Hose outer diameter: 6 mm (polyurethane resin tube)


CAST


DIGITALIZADOR 3D


CAD


CAM


MAQUINA


PRODUTO