Cuttable material Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Fiber reinforced resin, CoCr sinter metal
Loadable workpiece shape Step section: 98.5 mm (3.88 in.) (diameter), height 10 mm(0.39 in.)
Body section: 95 mm (3.74 in.)(diameter), height max. 60 mm(2.36 in.)
Pin diameter: 6 mm(0.24 in.)
Operating speed XYZ axis: 6 to 1,800 mm/min. (0.24 to 70.9 in./min.)
Spindle motor Brushless DC motor
Spindle speed 6,000 to 30,000 rpm
Rotary axis travel angle A: ±360°, B: ±30°
Number of burs housed 15
Attachable bur Shank diameter: 4 mm (0.16 in.), Length: 40 to 55 mm(1.57 to 2.17 in.)
Compatible compressed air 0.02 to 0.2 Mpa
Interface USB
Control command set RML-1, NC code
Power requirements AC 100 V to 240 V ± 10%, 50/60 Hz, 2.0 A (overvoltage category II, IEC 60664-1)
Power consumption Approx. 200 W
Operating noise During operation: 70 dB (A) or less (when not cutting), During standby: 45 dB (A) or less
External dimensions Width x Depth x Height 495 × 660 × 600 mm (19.5 × 26.0 × 23.6 in.)
Weight 67kg (147.7 lbs.)
Installation Environment Indoor use, Altitude: Up to 2,000 m (6,562 ft.), Temperature: 5 to 40 °C (41 to 104 °F) Humidity: 35 to 80% (no condensation) Ambient pollution degree: 2 (as specified by IEC 60664-1), Short-term temporary overvoltage: 1,440 V, Long-term temporary overvoltage: 490 V
Included items Power cord, USB cable, Manuals, DGSHAPE Software Package CD, Detection pin, Automatic correction jig,Material Adapters,Material AdapterRack, Pin-type material adapter,
Hexagonal driver, Spannar (for clamp),Spanner (for spindle), Milling bur holders, Milling bur positioner,Cleaning tool,Option adapter ID labels, Dust collection hoses, Dust collection hose adapter, Regulator,
,Cleaning brush,etc

System requirements for USB connection

Operating system Windows® 10,8.1,7(32-bit or 64-bit)or an upgradedcomputer originally preinstalled with Windows 7 or later
USB cable Use the included USB cable