Products

MODELDWX-4W
Cuttable material Glass ceramics, Composite resin
Loadable workpiece shape Width: Maximum 40 mm (1.57 in)
Depth: Maximum 20 mm (0.79 in)
Height: Maximum 20 mm (0.79 in)
Operating speed 6 to 1,800 mm/min. (0.24 to 70.9 in./min.)
Spindle Jaeger high frequency spindle
Spindle speed 15,000 to 60,000 rpm
Rotary axis travel angle A axis : ± 360°
Number of tools housed 4
Attachable bur Shank diameter 3 mm (Dedicated milling bur for wet grinding)
Compatible compressed air 0.6 to 0.8 MPa
Interface USB
Control command set RML-1, NC code
Power requirements AC 100 to 240 V ± 10 %, 50/60 Hz , 1.9 A (overvoltage category II, IEC 60664-1)
Power consumption Approx. 200 W
Operating noise During operation:70 dB (A) or less (when not cutting)
During standby: 48 dB (A) or less
External dimensions Width x Depth x Height 480 x 538 x 599 mm (18.9 x 21.2 x 23.6 in.)
Weight 53 kg (116.8 lbs.)
Installation Environment Indoor use, Altitude: Up to 2000 m (6,562 ft.)
Temperature: 5 to 28°C (41 to 82.4°F)
Humidity: 35 to 80% (no condensation)
Ambient pollution degree : 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage: 1440 V
Long-term temporary overvoltage: 490 V
Included items Power cord, USB cable, Drain hoses, Detection pin, Dedicated milling burs, Automatic correction jig, Measuring cup, Hexagonal screwdriver, Hexagonal wrench, Mounting screws, Setup guide, Daily maintenance card, Roland Software Package CD, Spindle maintenance kit.

System requirements for USB connection

Operating system Windows® 7/8/8.1/10 (32 or 64 bit)
USB cable Use the included USB cable


CAST


3D SCANNER


CAD


CAM


MACHINE


PRODUCT