Products

MODELDWX-4
Cut table material Zirconia (pre-sintered), Wax, PMMA, Composite resin
Loadable work piece shape

Block

Width x Depth: 76×38, Height: 10 to 22 mm

Loadable work piece shape

Pin

Width x Depth x Height: Maximum 85 x 40 x 22 mm
Operating speed XYZ axis: 6 to 1800 mm/min. (0.24 to 70.8 in./min.)
Spindle motor Brushless DC motor
Spindle speed 6,000 to 30,000 rpm
Rotary axis travel angle A: ±360°
Number of tools housed 2
Attachable tool Shank diameter: 4 mm, Length: 40 to 55 mm
Compatible compressed air 0.02 to 0.2 MPa
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1)
Control command set RML-1, NC code
Power requirements AC100 to 240 V ± 10%, 50/60 Hz, 0.8 to 0.4 A (overvoltage category II, IEC 60664-1)
Power consumption Approx. 70 W
Operating noise During operation: 70 dB (A) or less (when not cutting) During standby: 40 dB (A) or less
External dimensions Width x Depth x Height: 340×365×405 mm (13.4×14.4×16.0 in.)
Weight 22 kg (48.5 lbs)
Installation Environment
Indoor Use, altitude: up to 2000 m
Temperature: 5 to 40 °C (41 to 104 °F)
Relative humidity: 35 to 80 % (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Short-Term Temporary Overvoltage: 1440 V
Long-Term Temporary Overvoltage: 490 V
Included items
Power cord, USB cable, Manual, Software Package CD-ROM, Detection pin, Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver, spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc.

System Requirements

Operating system Windows® 7/8/8.1/10 (32 or 64 bit)
USB cable Use the included USB cable


CAST


3D SCANNER


CAD


CAM


MACHINE


PRODUCT